How to update the FM-1 to official firmware V16
Get your FM-1 onto M-VAVE's official V16 firmware, whether you're on stock V13βV15 or coming back from custom firmware like SLOOP or Clipper.
What you need
- M-UPGRADE, M-VAVE's updater, and the FM-1 V16 file (
FM-1.fwsc), both from m-vave.com/download. - A Windows PC or Mac. M-UPGRADE talks to the FM-1 in a way that doesn't work under Wine/Bottles on Linux. Linux users: see the Linux section below.
- A good USB cable plugged straight into the computer (no hub), and every other music app closed.
Updating from stock firmware (V13, V14, V15)
- Back up anything you've made. A firmware update can reset patterns and settings.
- Plug in the FM-1 and open M-UPGRADE. It should show FM-1 Β· Connected and your current firmware number (for example 015).
- Click Select firmware and choose
FM-1.fwsc. It should show Version 016. - Click Start upgrade and don't touch anything. The FM-1 restarts into an update mode (it may show as "Recovery mode"), receives the data, then restarts again.
- When it says Upgrade complete. Verified FM-1_016, you're done. The last page of GLO on the FM-1 shows the firmware version.
If M-UPGRADE says "MIDI device changed or disconnected" after you've swapped firmware, close and reopen M-UPGRADE so it forgets the old device, then try again.
Coming back from SLOOP or Clipper: "UPDATE FAILED -5"
Lots of people hit this. If your FM-1 is running SLOOP or Clipper and you try to install V16, the FM-1 screen shows UPDATE FAILED -5 and M-UPGRADE shows error 258 ("timed out waiting for a MIDI device response"). It happens on Windows too, so it isn't your computer. The custom firmware refuses V16 before anything is written, so your FM-1 is safe.
The fix is to go through V15 first:
- Get the official V15 file. M-VAVE publishes it in its own GitHub repository: m-vave/fm1_open β FM-1_015.fwsc.
- Open the custom firmware's own web installer in Chrome or Edge (for Clipper: Clipper installer) and choose Return to the official firmware. Pick the V15 file. This step works from any computer, Linux included.
- When the FM-1 boots stock V15, update to V16 with M-UPGRADE as described above.
Back up your SLOOP or Clipper projects with their editor first. Returning to official firmware won't keep them.
On Linux?
- V15 via the web installer works in Chrome on Linux.
- V16 needs M-UPGRADE, which doesn't see the FM-1 under Wine. Use a Windows or Mac computer, or run Windows in a virtual machine (for example virt-manager with KVM) and pass the FM-1's USB connection through to it.
- In a VM, the FM-1 shows up under several USB IDs during an update: normal mode
4c4a:c755, update loader4d4a:4155("Jieli Technology"), and Felucca-based custom firmware1209:0001. Make sure the VM grabs all of them automatically, or the update times out with "No matching OTA-MIDI or HID Loader was found".
What's new in V16?
Eight Voices you can layer or split, 20-note polyphony, a 64-step sequencer with an 8Γ8 arrangement grid, 128 shared effect setups, new CC numbers and more. The layering lesson and the sequencer lesson walk through the big ones.