When it acts weird
Notes won't stop
Hold PLAY/STOP (Panic). In FL Studio, make sure only the FM-1 input is enabled.
"Disable SEQ to enter" / "Disable ARP to enter"
ARP and SEQ can't both be on. Switch off whichever one is lit.
My effects didn't change with the preset
On purpose in V16: effects are shared. Change them on the FX screen with ALGORITHM.
My layer disappeared after switching off
Voice settings are saved with SAVE → Globe or ALL.
Keyboard is way too high or low
Press OCT− and OCT+ together.
A setting isn't where this guide says
V16 reshuffled GLO into five pages (Voices 1–4, Voices 5–8, performance and connection, display, data). Flip through all five with SELECT. The last one shows the firmware version.
No sound in my headphones (or the speaker won't turn off)
Use headphones with a standard 3.5mm stereo (TRS) plug. Some phone headsets with a microphone ring (TRRS) don't sit right in the jack. Also check MASTER volume and that the Voice you're playing is On.
My computer doesn't see the FM-1
Most often it's a charge-only USB cable: try another cable that you know carries data, plugged straight into the computer (no hub). Close other music apps that might be holding it, then unplug and replug.
Every note plays twice in FL Studio
Only enable the FM-1 itself in FL Studio's MIDI input list. "Midi Through" and other virtual ports loop notes back. See the FL Studio lesson.
All my Voices play at once from the DAW
The Voices are set to the same MIDI channel, or to ALL. Give each Voice its own channel (PRESETS → Voice → K1). See the MIDI reference.
Every note is the same loudness
The FM-1's keys aren't velocity sensitive: they send the fixed Velocity set in GLO. Use Voice Level, CC11 expression from a DAW, or a velocity-sensitive keyboard for dynamics.
My old effect knobs/CCs don't work anymore
V16 moved effect CCs to 70–93 and they only respond on the Effect channel. Old CC0–23 mappings need updating. MIDI reference →
The sequencer won't follow my DAW's tempo
Turn on Sync on the SEQ (or ARP) pages, and make sure your DAW sends MIDI clock to the FM-1's port.
Bluetooth MIDI won't connect
Long-press HOME to switch Bluetooth on: the HOME LED blinks while waiting and stays solid once connected. Pair from your app's MIDI/Bluetooth settings rather than the phone's main Bluetooth menu.
I loaded a sound pack and now want my old sounds back
If you exported the bank first, load that .syx back the same way. How to load and back up banks →